Conform Dual Articulating Arm

Buy Now

The Conform Dual Articulating Monitor Arm aligns two monitors side-by-side on a single base while maintaining independent movement and articulation. Utilizing the same pin assembly system as the rest of the series, the Conform Dual can be decoupled to use independently should your needs change. Mount the arm to a variety of bases, add additional arms or reconfigure as hardware and office personnel needs change.

The exceptionally smooth lifting gas spring, coupled with precision bushings, provides years of maintenance-free maneuverability. The Conform Dual Articulating Monitor Arm has been engineered to support over 12,000 cycles and exceeds ANSI/BIFMA x5.5 requirements. TAA Compliant.

Conform Features

  • Supports two monitors 5–17 lb. each
  • Maximum monitor height: 19.5″ (full range of motion)
  • Articulation range: 13″
  • Forward reach: 15.375″
  • Stowed depth: 5.5″
  • Monitor : Tilt: +90°/-45° Pivot: +/-90°, Rotation: +/-90°
  • Standard VESA (75 mm & 100 mm)
  • Available in Silver
  • Maintenance-free gas springs support two 5-17 lb. monitors
  • Extends to 15.375 inches of forward reach, for easy monitor viewing
  • Quickly folds down to 5.5 inches, freeing up user workspace
  • Easily route and conceal cables through the integrated wire managers
  • Adjust to the perfect height, with 13 inches of vertical movement
  • Discrete silver color blends into office environments
  • Designed for fast and easy installation

Documentation

  • Finish Color Options

Dimensions

*Shown with optional C-Clamp Base
Dual articulating

Conform Base Options

C-Clamp & Grommet Base

  • For use with Articulating Monitor Arms
  • Convenient top adjusting C-clamp design
  • Includes both c-clamp & grommet mounting options
  • 180° pivot limiter on lower arm for space constrained environments
  • Supports up to 48 lb.
  • Buy Now
  • C-Clamp & Grommet Base Instructions

Conform Two Piece C-Clamp & Grommet Base

Conform_Two-Piece-C_Clamp_Grommet_Base

  • For use with Articulating Monitor Arms
  • Detachable two piece c-clamp design for panel mounted desks
  • Includes both c-clamp & grommet mounting options
  • 180° pivot limiter on lower arm for space constrained environments
  • Supports up to 48 lb.
  • Buy Now
  • Conform Two Piece C-Clamp & Grommet Base Instructions

Tool Bar & Slatwall Base

  • For use with Articulating or Static Monitor Arms
  • Easily mount to Tool Bars, Privacy Panels & Slatwalls
  • Clamping design supports slat rails up to 1.25″ wide
  • Supports up to 48 lb.
  • Buy Now
  • Tool Bar & Slatwall Base Instructions

Wall Plate Base

*Mounting hardware not included; drywall installation requires screw to stud contact

14″ Pole Base with C-Clamp & Grommet

Conform-14'-Pole-C-Clamp

28″ Pole Base with Heavy Duty C-Clamp & Grommet

Conform-28'-Pole

Adapter Options

Knoll® Antenna® Adaptor

* Knoll Antenna capacity dependent

Dual Arm Adaptor

Dual Pole Mount Adapter

Single Pole Mount Adapter

Accessory Options

Flat, Static Extension Arm

Quick Release Adaptor

Conform_Articulating_Arm_9

  • Simplify monitor installation with a Quick Release Adaptor
  • Fits Standard VESA mounting patterns (75 mm & 100 mm)
  • One adaptor per monitor
  • Dimensions 4.5″ W × 4.5″ H × .5″ D
  • Buy Now

Laptop Holder

  • Accommodates most 13″ to 15″ laptops, up to 10lbs
  • Supports laptops up to 10 lb
  • Use with single or dual monitor arms
  • Depth adjusts from 9.2″ to 11.7″ allowing use of docking stations
  • Laptop held in place by formed front edge
  • Anti-vibration pads provide secure foundation and minimize laptop vibration
  • Vent design for optimal cooling
  • Silver finish, steel construction
  • Laptop Holder Instructions
  • Buy Now

Twin Monitor Bracket

  • For use with Articulating Monitor Arms Only
  • Converts single monitor arm into a dual monitor arm*
  • Recommended for use with Heavy Duty Articulating Arm
  • Maximum compatible monitor widths 24.5″
  • Available in black
  • Buy Online

*Reduces Maximum Weight Capacity of Arm by 5 lbs