Computer Desk Accessories2018-10-16T11:02:07+00:00

Computer Desk Accessories & Parts

los-logo

101 Chair

los-3-chair-100
  • Student/Training room chair
  • Modern design
  • Reinforced chair frame for strength and flexibility
  • Curved chair back and padded upholstered cushion for comfort
  • Height adjustable from 15″ to 19.5″
  • Polished aluminum base
  • Twin wheel hooded Polyurethane caster wheels for use on any surface
  • Abrasion resistant seat cushion—exceeds 50,000 cycles Martindale abrasion testing.
  • 5 year warranty
  • Available in Graphite Black with Black seat cushion
  • LOS Student Chair Cut Sheet

Remote Control

LOS3-REMOTE
  • Recommend 1 remote handset per room
  • Allow instructor/trainer to raise and lower monitors simultaneously
  • Lock feature allows instructor/trainer to lock monitors in the up or down position
  • Integrated flashlight
  • Easy channel set and changeability for multiple room requirements
  • Remote Control Instructions

Casters

LOS-3-Casters
  • Allows mobility to individual Line of Sight Workcenters
  • Includes lock to allow stations to be secure when movement is not required
  • Dual wheel, low profile design adds only 3/4″ to workcenter height
  • Sold individually—4 required per workcenter
  • Casters cannot be used with hard wire power options

Worksurface Grommet Cover

LOS-3-Grommet
  • 80 mm diameter 3 piece molded covers
  • Removable cover allows large cords to pass through
  • Cover door rotates to adjust opening to cord sizes
  • Outer liner fills cutout to cover top core material
  • Available in gray, black, & white to accent laminate colors
  • 2 required per top (unless using LOS3-DTP-2P2USB-BK)

Dual Monitor Adaptor

LOS-3-Dual-Monitor-Adaptor
  • Converts single monitor station to dual monitor station
  • Adjustable width mounts fit monitors up to 22″ actual width
  • VESA Quick Release included
  • Mounting hardware included
  • Black powder coated steel construction

Desktop Power

Zens Wireless Charger

los-3-zens-wireless-charger-100-800x618
  • Available in 5 W & 15 W
  • Qi standard wireless charging technology
  • Fits standard 80mm cut out in all LOS3 Workcenter tops
  • Available in black
  • 5 W version works on Qi charge compatible smart phones and smart watches
  • 15 W version works on Qi charge compatible smart phones, tablets, and smart watches
  • Professional grade charger
  • Zens Wireless Charger Cut Sheet

Power USB Charger Grommet

LOS-3-USB-Grommet
  • Fit standard 80 mm cut out in all LOS3 Workcenter tops
  • Two 120 V, 60 Hz grounded power outlets
  • Two 2 A USB charging ports

Parts for Connecting Computer Desks

Back to Back Filler Panels

LOS-3-Back-to-Back-Filler-Panels
  • Covers the vertical space between two LOS3 Workcenters when placed back to back
  • Non-handed design installs left or right as needed
  • Simple magnetic attachment to side for easy installation
  • Use one Filler Panel per visible outside end of back to back LOS3 Workcenters
  • Use in conjunction with Back to Back Filler Plates
  • Color matched powder coated steel construction
  • Filler Panel and Filler Plate Instructions

Back to Back Filler Plates

LOS-3-Back-to-Back-Filler-Plates
  • Covers the horizontal space between two LOS3 Workcenters when placed back to back
  • Keep objects from falling into space behind back to back LOS3 units
  • Use one Filler Plate per set of back to back LOS3 Workcenters
  • Installs with pre-drilled locations under the lids of back to back LOS3 Workcenters
  • Use in conjunction with Back to Back Filler Panels
  • Color matched powder coated steel construction
  • Filler Panel and Filler Plate Instructions

Side by Side Gang Bracket Kit

LOS-3-Gang-Bracket
  • Connect LOS3 Workcenters side by side
  • Keeps rows of LOS3 Workcenters aligned properly
  • Easy installation
  • Powder coated steel construction
  • Required when using daisy chain power options in multiple units
  • Gang Bracket Instructions

Keyboard Drawers

19″ Keyboard Drawer with Tray

LOS-3-19inch-keyboard-drawer
  • 19″ keyboard drawer w/ 8″ right/left sliding mouse surface & palm support
  • Sliding left to right mouse tray
  • 16″ long ball bearing slides (11″ actual extension)
  • Fixed height 2.5″ below underside of worksurface
  • Black 1/4″ phenolic construction
  • Fits only 30″ deep worksurfaces 

25″ Keyboard Drawer

LOS-3-25inch-keyboard-drawer
  • 25″ keyboard drawer & palm support
  • 16″ long ball bearing slides (11″ actual extension)
  • Fixed height 2.5″ below underside of worksurface
  • Black 1/4″ phenolic construction
  • Fits only 30″ deep worksurfaces

CPU Holders

On-Board Thin Client/Micro CPU Holder

Thin_Client_CPU_Holder
  • Installs inside LOS Electric and Manual Workcenters
  • Attaches to rear of keyboard holder
  • Simplifies connections and cabling inside of LOS units
  • Installs right or left as required
  • Black powder coated steel construction
  • Thin, Micro CPU Holder Instructions

Large CPU Holder

large-los_CPU_Holder
  • Installs under worksurface
  • Use for larger tower CPU’s
  • Dual adjustable 5′ long straps fit most CPU’s
  • Includes 17″ nylon glide track
  • 360° swivel at track
  • Black powder coated steel construction

Small/Mini Tower CPU Holder

Small_Tower_CPU_Holder

Hang On CPU Holder

Hang_On_CPU_Holder
  • Hangs on front panel of Line of Sight base
  • Adjustable height and width
  • Use for larger tower CPU’s
  • Select model based on CPU size
  • Color matched powder coated steel construction
  • Hang-On CPU Holder Instructions

Wall Corded Power

Power Bar

LOS-3-Power-Bar
  • UL/CSA Certified
  • End power receptacle allows daisy chain connection
    of up to 4 Power Bars in-line
  • Lighted rocker switch for on/off control
  • Includes 15 A circuit breaker
  • Fits all widths of Line of Sight Workcenters
  • Includes mounting brackets and hardware
  • Maximum power load 15 A per daisy chain
  • Total equipment power draw calculations required on site to prevent overload
  • Power Bar Instructions

Power Strip

LOS-3-power-strip
  • Intended for single station applications
  • UL/CSA Certified
  • Lighted rocker switch for on/off control
  • Includes 15 A grounded power cord
  • Includes 15 A circuit breaker
  • Fits all widths of Line of Sight Workcenters
  • Includes mounting hardware

Hard Wire Power

Power Track (4 or 8 Outlet)

LOS-3-Power-Track-4-or-8
  • ETL/CSA Certified
  • Available in 4 or 8 outlets per Power Track (8 outlets recommended for dual display units)
  • Available in 1, 2, or 4 circuit options
  • US Specs allows up to 16 receptacles per circuits 1, 2, 3, and 4 respectively
  • 4 circuit option meets industry standard 8 wire requirements
  • Integrated flex conduit and snap connectors allow easy assembly and daisy chain configuration
  • Requires 1 dedicated 120 V, 60 hZ, 20 A power source per circuit
  • Daisy chain 16 A max load per circuit
  • Includes mounting & installation hardware
  • Power Track Instructions

Power Entry Cable

LOS-3-power-entry-cable
  • 8 wire flex conduit Power Entry Cable
  • Connect up to 4 dedicated 120 V, 20 A circuits and 80 individual 120 V receptacles
  • Hard-wire connection via J-Box or power pole to building power source
  • Snap locks into Power Track for easy connection
  • Use one entry per run based on circuits chosen and maximum connection recommendations

Pass Through / Extension Cable

LOS-3-pass-through-extension-cable
  • 24″ Length extends Power Track cables
  • Male/female plug ends
  • Extra cable required for back to back hard wire power transfer connection
  • Maximum circuit and receptacle limits apply

About Workrite Ergonomics

Founded in 1991, Workrite Ergonomics is an industry leader in the design, manufacture and distribution of height-adjustable workcenters and ergonomic office accessories, including adjustable keyboard platform systems and flat panel monitor support systems.

Quick Links

USA HQ Contact Info

2277 Pine View Way Suite 100, Petaluma, CA 94954

Phone: 1-800-959-9675

Fax: 1-800-930-8989

Web: www.workriteergo.com

Canadian HQ Contact Info

950 Warden Avenue, Toronto, Ontario M1L 4E3

Phone: 1-800-463-7731

Fax: 416-759-9272

Web: http://workriteergo.com/

Get Updates in Your Inbox

Subscribe To Our Newsletter

Join our mailing list to receive the latest news, updates and specials from Workrite Ergonomics.

You have Successfully Subscribed!

Send this to a friend