Computer Desk Accessories & Parts
Acrylic Dividers
- Clear Acrylic creates separation between users while maintaining view for training purposes
- Provides physical separation between users
- Simple and easy cleaning with mild soaps, ammonia free window cleaners, and disinfectants
- Impact and scratch resistant
- Rounded edges and corners for user safety
- GREENGUARD Gold Certified
- UL746 and UL94 Certified
Remote Control
- Recommend 1 remote handset per room
- Allow instructor/trainer to raise and lower monitors simultaneously
- Lock feature allows instructor/trainer to lock monitors in the up or down position
- Integrated flashlight
- Easy channel set and changeability for multiple room requirements
Casters
- Allows mobility to individual Line of Sight Work centers
- Includes lock to allow stations to be secure when movement is not required
- Dual wheel, low profile design adds only 3/4″ to work center height
- Sold individually—4 required per work center
- Casters cannot be used with hard wire power options
Worksurface Grommet Cover
- 80 mm diameter 3 piece molded covers
- Removable cover allows large cords to pass through
- Cover door rotates to adjust opening to cord sizes
- Outer liner fills cutout to cover top core material
- Available in gray, black, & white to accent laminate colors
- 2–3 required per top (unless using Line of Sight Power USB Charger Grommet)
Dual Monitor Adaptor
- Converts single monitor station to dual monitor station
- Adjustable width mounts fit monitors up to 22″ actual width
- VESA Quick Release included
- Mounting hardware included
- Black powder coated steel construction
Desktop Power
Zens Wireless Charger
- Available in 5 W & 15 W
- Qi standard wireless charging technology
- Fits standard 80mm cut out in all LOS3 Work center tops
- Available in black
- 5 W version works on Qi charge compatible smart phones and smart watches
- 15 W version works on Qi charge compatible smart phones, tablets, and smart watches
- Professional grade charger
- Zens Wireless Charger Cut Sheet
Power USB Charger Grommet
- Fit standard 80 mm cut out in all LOS3 Work center tops
- Two 120 V, 60 Hz grounded power outlets
- Two 2 A USB charging ports
Parts for Connecting Computer Desks
Back to Back Filler Panels
- Covers the vertical space between two LOS3 Workcenters when placed back to back
- Non-handed design installs left or right as needed
- Simple magnetic attachment to side for easy installation
- Use one Filler Panel per visible outside end of back to back LOS3 Workcenters
- Use in conjunction with Back to Back Filler Plates
- Color matched powder coated steel construction
- Filler Panel and Filler Plate Instructions
Back to Back Filler Plates
- Covers the horizontal space between two LOS3 Workcenters when placed back to back
- Keep objects from falling into space behind back to back LOS3 units
- Use one Filler Plate per set of back to back LOS3 Workcenters
- Installs with pre-drilled locations under the lids of back to back LOS3 Workcenters
- Use in conjunction with Back to Back Filler Panels
- Color matched powder coated steel construction
- Filler Panel and Filler Plate Instructions
Side by Side Gang Bracket Kit
- Connect LOS3 Workcenters side by side
- Keeps rows of LOS3 Workcenters aligned properly
- Easy installation
- Powder coated steel construction
- Required when using daisy chain power options in multiple units
- Gang Bracket Instructions
Keyboard Drawers
19″ Keyboard Drawer with Tray
- 19″ keyboard drawer w/ 8″ right/left sliding mouse surface & palm support
- Sliding left to right mouse tray
- 16″ long ball bearing slides (11″ actual extension)
- Fixed height 2.5″ below underside of worksurface
- Black 1/4″ phenolic construction
- Fits only 30″ deep worksurfaces
25″ Keyboard Drawer
- 25″ keyboard drawer & palm support
- 16″ long ball bearing slides (11″ actual extension)
- Fixed height 2.5″ below underside of worksurface
- Black 1/4″ phenolic construction
- Fits only 30″ deep worksurfaces
CPU Holders
On-Board Thin Client/Micro CPU Holder
- Installs inside LOS Electric and Manual Work centers
- Attaches to rear of keyboard holder
- Simplifies connections and cabling inside of LOS units
- Installs right or left as required
- Black powder coated steel construction
- Thin, Micro CPU Holder Instructions
Large CPU Holder
- Installs under worksurface
- Use for larger tower CPU’s
- Dual adjustable 5′ long straps fit most CPU’s
- Includes 17″ nylon glide track
- 360° swivel at track
- Black powder coated steel construction
- Large CPU Holder Instructions
Small/Mini Tower CPU Holder
- Installs under worksurface
- Includes 9.5″ nylon glide track
- 360° swivel at track
- Black powder coated steel construction
- Small, Mini Tower CPU Holder Instructions
Hang On CPU Holder
- Hangs on front panel of Line of Sight base
- Adjustable height and width
- Use for larger tower CPU’s
- Select model based on CPU size
- Color matched powder coated steel construction
- Hang-On CPU Holder Instructions
Wall Corded Power
Power Bar
- UL/CSA Certified
- End power receptacle allows daisy chain connection
of up to 4 Power Bars in-line - Lighted rocker switch for on/off control
- Includes 15 A circuit breaker
- Fits all widths of Line of Sight Work centers
- Includes mounting brackets and hardware
- Maximum power load 15 A per daisy chain
- Total equipment power draw calculations required on site to prevent overload
- Power Bar Instructions
Power Strip
- Intended for single station applications
- UL/CSA Certified
- Lighted rocker switch for on/off control
- Includes 15 A grounded power cord
- Includes 15 A circuit breaker
- Fits all widths of Line of Sight Work centers
- Includes mounting hardware
Hard Wire Power
Power Track (4 or 8 Outlet)
- ETL/CSA Certified
- Available in 4 or 8 outlets per Power Track (8 outlets recommended for dual display units)
- Available in 1, 2, or 4 circuit options
- US Specs allows up to 16 receptacles per circuits 1, 2, 3, and 4 respectively
- 4 circuit option meets industry standard 8 wire requirements
- Integrated flex conduit and snap connectors allow easy assembly and daisy chain configuration
- Requires 1 dedicated 120 V, 60 hZ, 20 A power source per circuit
- Daisy chain 16 A max load per circuit
- Includes mounting & installation hardware
- Power Track Instructions
Power Entry Cable
- 8 wire flex conduit Power Entry Cable
- Connect up to 4 dedicated 120 V, 20 A circuits and 80 individual 120 V receptacles
- Hard-wire connection via J-Box or power pole to building power source
- Snap locks into Power Track for easy connection
- Use one entry per run based on circuits chosen and maximum connection recommendations
Pass Through / Extension Cable
- 24″ Length extends Power Track cables
- Male/female plug ends
- Extra cable required for back to back hard wire power transfer connection
- Maximum circuit and receptacle limits apply
Connect with Us