Power Distribution Modules – Benching
Power Distribution Modules – Benching
Power Module, Circuit 1
Power Module, Circuit 1
- Receives & distributes power for up to 5 workstations (5 station maximum, per power in-feed cable & 1 dedicated 20 Amp circuit)
- ETL Listed, Conforms to UL 183 Power Distribution Systems Standards
- Color coded quick connection ports to power in-feed & power distribution cables
- 4 power outlets (120 VAC, 15 Amp) ā 2 above, 2 below work surface
- 2 USB charging ports (2.1 Amp for fast phone or tablet charging)
- Scratch resistant, powder coated paint
- Requires Workrite benching work surface/top
- Benching Single Workcenter Power System Assembly Instructions
- Benching Daisy Chain Power System Assembly Instructions
Power Module, Circuit 2
Power Module, Circuit 2
- Receives & distributes power to 5 additional workstations (10 station maximum, per power in-feed cable & 2 dedicated 20 Amp circuits)
- ETL Listed, Conforms to UL 183 Power Distribution Systems Standards
- Color coded quick connection ports to power in-feed & power distribution cables
- 4 power outlets (120 VAC, 15 Amp) ā 2 above, 2 below work surface
- 2 USB charging ports (2.1 Amp for fast phone or tablet charging)
- Scratch resistant, powder coated pain
- Requires Workrite benching work surface/top
- Benching Single Workcenter Power System Assembly Instructions
- Benching Daisy Chain Power System Assembly Instructions
Power Jumper Block
Power Jumper Block
- Creates a 90 degree station-to-station jumper cable connection
- Color coded quick connection ports for power distribution cables
- Scratch resistant, powder coated paint
- Requires Workrite benching worksurface/top
- Benching Daisy Chain Power System Assembly Instructions
Power Distribution Cables – Benching
Power Distribution Cables – Benching
Below Desk Cross Cables
Below Desk Cross Cables
- Connects Power Module to Power Jumper Block
- Easy to use color coded quick connect plugs
- Flexible metal conduit cable
- Includes cable management clips
- Available in 3 lengths (24″, 36″ & 48″) to match workstation sizes
- Requires Workrite benching worksurface/top
- Benching Daisy Chain Power System Assembly Instructions
Side to Side Jumper Cable
Side to Side Jumper Cable
- Connects Power Jumper Block to Power Module in side to side workstations
- 50″ flexible metal conduit cable with black mesh cover
- Easy to use color coded quick connect plugs
- Requires Workrite benching worksurface/top
- Benching Daisy Chain Power System Assembly Instructions
Back to Back Jumper Cable
Back to Back Jumper Cable
- Connects Power Jumper Block to Power Module in back to back workstations
- 54″ flexible metal conduit cable with black mesh cover
- Easy to use color coded quick connect plug
- Requires Workrite benching worksurface/top
- Benching Daisy Chain Power System Assembly Instructions
Power In-feed Cables – Benching
Power In-feed Cables – Benching
Hardwired Power In-Feed Cable with Quick Connect
Hardwired Power In-Feed Cable with Quick Connect
- 4 wire, 2 circuit power in-feed cable
- Hardwired connection, to be operated on one dedicated 20 Amp circuit for up to 5 stations or two dedicated 20 Amp circuits for up to 10 stations
- A balanced electrical circuit configuration is recommended for 6 or more stations
- Connection to the building wiring must be done by a qualified electrician according to national state & local codes
- Color coded quick connect plug to Power Module for easy installation
- 96″ flexible metal conduit cable with black mesh cover
- Requires Workrite benching worksurface/top
- Benching Daisy Chain Power System Assembly Instructions
Hardwired Power Outlet with Dual Quick Connect Power In-feed Cable
Hardwired Power Outlet with Dual Quick Connect Power In-feed Cable
- Fits standard electrical j-box
- Use DecoraĀ® face plate for trim (not provided )
- 4 wire, 2 circuit power in-feed wiring Hard wired connection, to be operated on one dedicated 20 Amp circuit for up to 5 stations or two dedicated 20 Amp circuits for up to 10 stations
- A balanced electrical circuit configuration is recommended for 6 or more stations
- Connection to the building wiring must be done by a qualified electrician according to national state & local codes
Quick Connect Power In-Feed Cable:
- Easy to use color coded quick connect plugs
- 96″ flexible metal conduit cable with black mesh cover
Requires Workrite benching worksurface/top
Power In-feed Cable for Standard Wall Outlets
Power In-feed Cable for Standard Wall Outlets
- Powers single workstation only
- 72″ quick connection plug with flexible metal conduit cable and black mesh cover to flex cord with 20 Amp molded plug
- Requires 20 Amp to 15 Amp adaptor (Included)
- 80″ overall length
- Requires Workrite benching worksurface/top
- Benching Single Workcenter Power System Assembly Instructions
- Benching Daisy Chain Power System Assembly Instructions
Connect with Us