Keyboard Arm & Platform Accessories

Adjustable Corner Diagonal

  • Converts 90º & curved corners (up to 9″) to usable work areas
  • Allows use of adjustable arm and keyboard platform when the natural corner of the worksurface does not permit it
  • Adjusts to fit 1″ to 2.25″ thick worksurfaces
  • Clamping design eliminates spacers, saving installation time
  • Works with the Pinnacle 2 and Pinnacle AD arms
  • Works with the following Workrite platforms: 2180S, 2181SN, 2100FT, 317RL, 2110D, 2110RL, 180
  • Dimensions: 12″W × 1.75″H
  • Corner Maker 179ACD Installation Instructions
  • Buy Online

Compact Corner Diagonal

  • Converts 90º corners and diagonal corners less than 17″ to usable work areas
  • Moves operator closer to worksurface
  • Designed specifically to fit model #321RL with Pinnacle 2 Arm
  • Works with the Pinnacle 2 and Pinnacle AD arms
  • Works with the following Workrite platforms: 188, 488, 2180S, 2181SN, 2100FT, 317RL, 2110D, 2110RL, 2110RLN, 321RL, 180, 187, 487
  • Dimensions: 17.5″W × 8.75″D × 1.5″H
  • Corner Maker 179CCD Installation Instructions
  • Buy Online

Corner Rectangle

  • Converts 90° corners and corners with keyboard cutouts to usable diagonal corners
  • Works with all Workrite keyboard arms
  • Works with the following Workrite platforms: 188, 488, 2180S, 2181SN, 2100FT, 317RL, 2110D, 2110RL, 2110RLN, 321RL, 180, 187, 487, 385RL, 386RL, 482, 483, 485, 486, 182, 183, 185, 186
  • Dimensions: 26″W × 15″D × 1.5″H
  • Corner maker 179CR Installation Instructions
  • Buy Online

Swivel Plate

Swivel_Plate

  • Mounts between adjustable arm and platform
  • Provides an additional 45º pivot point for extra adjustability and special storage or mounting requirements
  • Works on all Workrite arms and AKP115
  • Swivel Plate Installation Instructions

Positive Tilt Lockout Kit

Positive_Tilt_Lockout_Kit

Mouse Platform Palm Support

  • LeatheRite™ memory foam palm support
  • Clip attachment requires no tools and is easy to add or remove as needed

Mounting Spacers

Mounting_Spacers

  • For mounting adjustable arms when edge is thicker than the rest of the worksurface
  • Works with all Workrite arms
  • Select 16″ or 21″ length and desired thickness

Bench Mount Kit

Designed for mounting keyboard arms and tracks to benching systems or adjustable height workcenters where support beams limit the availability of flat mounting surfaces. Attaches between the underside of the worksurface and the keyboard arm track with installation hardware provided.

  • Attaches between underside of worksurface and keyboard arm
  • Fits all Workrite keyboard arms
  • Powered coated steel construction

BMK-01

BMK_1B

Workrite Adjustable Height Workcenters

Once you have selected the appropriate keyboard arm and track for the depth of your worksurface, simply measure the clearance required to drop the keyboard track below the supports of the workcenter.

  • BMK-1-B should be used for all installations of tracks greater than 17” on Workrite’s Sierra HX, Sierra HXL, Fundamentals EX and Essentia Electric frame sets
  • BMK-1-B should also be used for all Sierra HXL crank installations, regardless of track length
  • BMK-2-B used with Cascade
  • Bench Mount Kit Installation Instructions

BMK-02

BMK__2B

Benching Systems

Once you have selected the appropriate keyboard arm and track for the depth of your worksurface, simply measure the clearance required to drop the keyboard track below the supports of the benching system.